If you think a check is flawed or have an idea for a check, please file an issue at https://github.com/fonttools/fontspector/issues and remember to include a pointer to the repo and branch you're checking.
Summary
| đĨ ERROR | đĨ FAIL | â ī¸ WARN | âšī¸ INFO | â PASS | ⊠SKIP |
|---|---|---|---|---|---|
| 1 | 14 | 20 | 19 | 85 | 86 |
| 0% | 6% | 9% | 8% | 38% | 38% |
Meaning of check results:
- đĨ An ERROR is something wrong with Fontspector itself, possibly a bug.
- â A FATAL is an extremely severe issue that must be addressed immediately.
- đĨ A FAIL is a problem with the font that must be fixed.
- â ī¸ A WARN is something that you should consider addressing.
- âšī¸ An INFO result simply prints something useful. Typically stats.
- â A PASS means the font looks good for the given checking routine.
- ⊠And a SKIP happens when the check does not apply to the given font.
If you get ERRORs, please help us improve the tool by reporting them at our issue tracker.
(but other kinds of bug reports and/or feature requests are also always welcome, of course!)
Fontspector version: 1.9.0
Opentype Specification Checks
Ensure Fonts have 'ital' STAT axis.
â ī¸ ttf
-
â ī¸ WARN
Static font is missing the 'STAT' table.
[code: no-stat-table]
Check that OS/2 fsSelection WWS bit is set correctly.
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
OS/2 fsSelection WWS bit is not set, and the font does not have name IDs 21/22 (WWS Family/Subfamily). If the font's naming is WWS-conformant, the WWS bit should be set.
[code: no-wws-without-wws-names]
Universal Profile Checks
Checking OS/2 usWinAscent & usWinDescent
đĨ ttf
-
đĨ FAIL
OS/2.usWinDescent value should be equal or greater than 333, but got 184 instead. The lowest point is in glyph 'usignsinh.alt'.
[code: descent]
Check base characters have non-zero advance width.
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
U+200C ZERO WIDTH NON-JOINER has non-zero advance width: 58
[code: non-zero-advance]
Check if each glyph has the recommended amount of contours.
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are inferred from the typical amounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.
The following glyphs do not have the recommended number of contours:- uni0D89 (U+0D89): found 1, expected one of: [2, 3, 4]
- uni0D93 (U+0D93): found 3, expected one of: [4, 5, 6]
- uni0D9E (U+0D9E): found 1, expected one of: [2, 3, 4]
- uni0DA1 (U+0DA1): found 2, expected one of: [3, 4, 5]
Does GPOS table have kerning information?
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
GPOS table lacks kerning information.
[code: lacks-kern-info]
Checking Vertical Metric linegaps.
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
OS/2 sTypoLineGap is not equal to 0.
[code: OS/2]
Check math signs have the same width.
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
The most common width is 285 among a set of 4 math glyphs. The following math glyphs have a different width, though: width=244: plus, equal
[code: width-outliers]
Name table records must not have trailing spaces.
đĨ GalleCANARY-Regular.ttf
-
đĨ FAIL
Name table record 3/1/1033/COPYRIGHT_NOTICE has trailing spaces that must be removed:
[code: trailing-space]Copyright (c) 2015â2018 mooniak (http://mooniak.com) Copyright (c) 2016â2018 Janaka CB Attanayake (janakacb@gmail.com)
Are there duplicate characters in the NAME table?
đĨ GalleCANARY-Regular.ttf
-
đĨ FAIL
Name table record 3/1/1033/COPYRIGHT_NOTICE has repeated characters
[code: repeated-characters-fail]:Copyright (c) 2015â2018 mooniak (http://mooniak.com) Copyright (c) 2016â2018 Janaka CB Attanayake (janakacb@gmail.com)
Checking OS/2 Metrics match hhea Metrics.
đĨ GalleCANARY-Regular.ttf
-
đĨ FAIL
OS/2 sTypoAscender (553) and hhea ascent (1016) must be equal.
[code: ascender] -
đĨ FAIL
OS/2 sTypoLineGap (463) and hhea lineGap (0) must be equal.
[code: lineGap]
Ensure indic fonts have the Indian Rupee Sign glyph.
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
Font is missing the Indian Rupee Sign glyph. Please add a glyph for Indian Rupee Sign (âš) at codepoint U+20B9.
[code: missing-rupee]
Check font contains no unreachable glyphs
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
The following glyphs could not be reached by codepoint or substitution rules:
- ddsinh.alt
- mbsinh.alt
- NULL
- usignsinh.alt
- uusignsinh.alt
- usignsinh.alt5
- uusignsinh.alt5
- yasign_usign_rephasinh
- yasign_uusign_rephasinh
- yasignsinh.alt
- kunddaliya
- mooniak
- notdef
- sinBhAa.virama
- sinFAa.virama
- sinGAa.virama
- sinHAa.virama
- sinKAa.virama
- sinNAa.virama
- sinNnAa.virama
- sinNngAa.virama
- sinTAa.virama
Ensure font has overlaps bit set correctly.
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
The following glyphs have overlaps but the overlaps bit is not set:
- rAaesinh
- sinFAa.virama
- sinHAa.virama
- sinGAa.virama
- uni0DDD (U+0DDD)
- sinBhAa.virama
- aasign_viramasinh
Metadata Checks
Check for codepoints not covered by METADATA subsets.
â ī¸ ttf
-
â ī¸ WARN
fonts/ttf/GalleCANARY-Regular.ttf: The following codepoints supported by the font are not covered by any subsets defined in the font's metadata file, and will never be served. You can solve this by either manually adding additional subset declarations to METADATA.pb, or by editing the glyphset definitions.
- U+0021 EXCLAMATION MARK: try adding one of: cham, khmer, gunjala-gondi, adlam, thaana, latin, mongolian, syriac, math, masaram-gondi
- U+0022 QUOTATION MARK: try adding one of: mongolian, latin, adlam, cham, math, wancho, masaram-gondi, khmer
- U+0023 NUMBER SIGN: try adding one of: math, khmer, adlam, latin, symbols
- U+0027 APOSTROPHE: try adding one of: math, khmer, wancho, cham, warang-citi, gunjala-gondi, masaram-gondi, adlam, latin
- U+0028 LEFT PARENTHESIS: try adding one of: mongolian, gunjala-gondi, masaram-gondi, thaana, adlam, latin, wancho, math, cham, syriac, khmer
- U+0029 RIGHT PARENTHESIS: try adding one of: cham, syriac, wancho, thaana, adlam, gunjala-gondi, mongolian, khmer, latin, masaram-gondi, math
- U+002A ASTERISK: try adding one of: syriac, math, adlam, gunjala-gondi, latin, symbols, khmer, masaram-gondi
- U+002B PLUS SIGN: try adding one of: latin, khmer, gunjala-gondi, adlam, masaram-gondi, math, syriac
- U+002C COMMA: try adding one of: latin, wancho, gunjala-gondi, adlam, masaram-gondi, nushu, thaana, cham, coptic, math, khmer
- U+002D HYPHEN-MINUS: try adding one of: kharoshthi, kayah-li, kaithi, lisu, math, masaram-gondi, mongolian, sundanese, latin, armenian, sora-sompeng, gunjala-gondi, syriac, wancho, nushu, cham, adlam, coptic, khmer, hebrew
- U+002E FULL STOP: try adding one of: syriac, math, adlam, avestan, thaana, latin, khmer, wancho, coptic, cham, masaram-gondi, nushu, gunjala-gondi
- U+002F SOLIDUS: try adding one of: khmer, latin, adlam, masaram-gondi, syriac, math, gunjala-gondi, cham, wancho
- U+0030 DIGIT ZERO: try adding one of: khmer, latin, nushu, symbols, math
- U+0031 DIGIT ONE: try adding one of: khmer, latin, nushu, symbols, math
- U+0032 DIGIT TWO: try adding one of: khmer, math, symbols, latin, nushu
- U+0033 DIGIT THREE: try adding one of: math, khmer, nushu, latin, symbols
- U+0034 DIGIT FOUR: try adding one of: math, khmer, latin, nushu, symbols
- U+0035 DIGIT FIVE: try adding one of: nushu, math, khmer, symbols, latin
- U+0036 DIGIT SIX: try adding one of: nushu, latin, math, khmer, symbols
- U+0037 DIGIT SEVEN: try adding one of: nushu, symbols, latin, math, khmer
- U+0038 DIGIT EIGHT: try adding one of: latin, khmer, symbols, math, nushu
- U+0039 DIGIT NINE: try adding one of: latin, math, nushu, symbols, khmer
- U+003A COLON: try adding one of: cham, syriac, masaram-gondi, thaana, latin, math, gunjala-gondi, coptic, khmer, meroitic, adlam
- U+003B SEMICOLON: try adding one of: coptic, cham, math, adlam, latin, khmer, thaana, masaram-gondi
- U+003C LESS-THAN SIGN: try adding one of: adlam, latin, khmer, masaram-gondi, math, gunjala-gondi
- U+003D EQUALS SIGN: try adding one of: gunjala-gondi, khmer, masaram-gondi, math, adlam, syriac, latin
- U+003E GREATER-THAN SIGN: try adding one of: latin, khmer, math, gunjala-gondi, masaram-gondi, adlam
- U+003F QUESTION MARK: try adding one of: math, masaram-gondi, khmer, latin, balinese, cham, gunjala-gondi, mongolian, adlam
- U+005B LEFT SQUARE BRACKET: try adding one of: wancho, syriac, khmer, math, adlam, latin
- U+005C REVERSE SOLIDUS: try adding one of: syriac, adlam, latin, khmer, math, wancho
- U+005D RIGHT SQUARE BRACKET: try adding one of: math, adlam, syriac, khmer, wancho, latin
- U+005E CIRCUMFLEX ACCENT: try adding one of: math, adlam, latin, khmer
- U+005F LOW LINE: try adding one of: latin, khmer, adlam, math
- U+007B LEFT CURLY BRACKET: try adding one of: math, wancho, latin, adlam, khmer
- U+007C VERTICAL LINE: try adding one of: khmer, latin, adlam, math
- U+007D RIGHT CURLY BRACKET: try adding one of: wancho, math, latin, adlam, khmer
- U+007E TILDE: try adding one of: khmer, latin, math
- U+2026 HORIZONTAL ELLIPSIS: try adding one of: meroitic, phags-pa, latin, gunjala-gondi, masaram-gondi, syriac, adlam
Or you can add the above codepoints to one of the subsets supported by the font: sinhala
[code: unreachable-subsetting]
Glyphset Checks
Shapes languages in all GF glyphsets.
đĨ GalleCANARY-Regular.ttf
-
đĨ FAIL
No GF glyphset was found to be supported >80%, so language shaping support couldn't get checked.
[code: no-glyphset-supported]
Font has correct separator glyphs?
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
Missing separator glyph U+2028
[code: missing-separator-glyphs] -
â ī¸ WARN
Missing separator glyph U+2029
[code: missing-separator-glyphs]
Licensing Checks
Copyright notices match canonical pattern in fonts
đĨ ttf
-
đĨ FAIL
GalleCANARY-Regular.ttf: Name Table entry: Copyright notices should match a pattern similar to:
"Copyright 2020 The Familyname Project Authors (git url)"
But instead we have got:
"copyright (c) 2015â2018 mooniak (http://mooniak.com) copyright (c) 2016â2018 janaka cb attanayake (janakacb@gmail.com) "
[code: bad-notice-format]
Repository Checks
Directory name in GFonts repo structure must match NameID 1 of the regular.
đĨ GalleCANARY-Regular.ttf
-
đĨ FAIL
Family name on the name table ('Galle CANARY') does not match directory name in the repo structure ('ttf'). Expected 'gallecanary'.
[code: mismatch]
Font File Checks
Check Google Fonts glyph coverage.
đĨ ttf
-
đĨ FAIL
fonts/ttf/GalleCANARY-Regular.ttf missing required codepoints:
- 0x0024: DOLLAR SIGN
- 0x0025: PERCENT SIGN
- 0x0026: AMPERSAND
- 0x0040: COMMERCIAL AT
- 0x0041: LATIN CAPITAL LETTER A
- 0x0042: LATIN CAPITAL LETTER B
- 0x0043: LATIN CAPITAL LETTER C
- 0x0044: LATIN CAPITAL LETTER D
- 0x0045: LATIN CAPITAL LETTER E
- 0x0046: LATIN CAPITAL LETTER F
- 0x0047: LATIN CAPITAL LETTER G
- 0x0048: LATIN CAPITAL LETTER H
- 0x0049: LATIN CAPITAL LETTER I
- 0x004A: LATIN CAPITAL LETTER J
- 0x004B: LATIN CAPITAL LETTER K
- 0x004C: LATIN CAPITAL LETTER L
- 0x004D: LATIN CAPITAL LETTER M
- 0x004E: LATIN CAPITAL LETTER N
- 0x004F: LATIN CAPITAL LETTER O
- 0x0050: LATIN CAPITAL LETTER P
- 0x0051: LATIN CAPITAL LETTER Q
- 0x0052: LATIN CAPITAL LETTER R
- 0x0053: LATIN CAPITAL LETTER S
- 0x0054: LATIN CAPITAL LETTER T
- 0x0055: LATIN CAPITAL LETTER U
- 0x0056: LATIN CAPITAL LETTER V
- 0x0057: LATIN CAPITAL LETTER W
- 0x0058: LATIN CAPITAL LETTER X
- 0x0059: LATIN CAPITAL LETTER Y
- 0x005A: LATIN CAPITAL LETTER Z
- 0x0060: GRAVE ACCENT
- 0x0061: LATIN SMALL LETTER A
- 0x0062: LATIN SMALL LETTER B
- 0x0063: LATIN SMALL LETTER C
- 0x0064: LATIN SMALL LETTER D
- 0x0065: LATIN SMALL LETTER E
- 0x0066: LATIN SMALL LETTER F
- 0x0067: LATIN SMALL LETTER G
- 0x0068: LATIN SMALL LETTER H
- 0x0069: LATIN SMALL LETTER I
- 0x006A: LATIN SMALL LETTER J
- 0x006B: LATIN SMALL LETTER K
- 0x006C: LATIN SMALL LETTER L
- 0x006D: LATIN SMALL LETTER M
- 0x006E: LATIN SMALL LETTER N
- 0x006F: LATIN SMALL LETTER O
- 0x0070: LATIN SMALL LETTER P
- 0x0071: LATIN SMALL LETTER Q
- 0x0072: LATIN SMALL LETTER R
- 0x0073: LATIN SMALL LETTER S
- 0x0074: LATIN SMALL LETTER T
- 0x0075: LATIN SMALL LETTER U
- 0x0076: LATIN SMALL LETTER V
- 0x0077: LATIN SMALL LETTER W
- 0x0078: LATIN SMALL LETTER X
- 0x0079: LATIN SMALL LETTER Y
- 0x007A: LATIN SMALL LETTER Z
- 0x00A1: INVERTED EXCLAMATION MARK
- 0x00A2: CENT SIGN
- 0x00A3: POUND SIGN
- 0x00A5: YEN SIGN
- 0x00A7: SECTION SIGN
- 0x00A8: DIAERESIS
- 0x00A9: COPYRIGHT SIGN
- 0x00AA: FEMININE ORDINAL INDICATOR
- 0x00AB: LEFT-POINTING DOUBLE ANGLE QUOTATION MARK
- 0x00AE: REGISTERED SIGN
- 0x00AF: MACRON
- 0x00B0: DEGREE SIGN
- 0x00B4: ACUTE ACCENT
- 0x00B6: PILCROW SIGN
- 0x00B7: MIDDLE DOT
- 0x00B8: CEDILLA
- 0x00BA: MASCULINE ORDINAL INDICATOR
- 0x00BB: RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK
- 0x00BF: INVERTED QUESTION MARK
- 0x00C0: LATIN CAPITAL LETTER A WITH GRAVE
- 0x00C1: LATIN CAPITAL LETTER A WITH ACUTE
- 0x00C2: LATIN CAPITAL LETTER A WITH CIRCUMFLEX
- 0x00C3: LATIN CAPITAL LETTER A WITH TILDE
- 0x00C4: LATIN CAPITAL LETTER A WITH DIAERESIS
- 0x00C5: LATIN CAPITAL LETTER A WITH RING ABOVE
- 0x00C6: LATIN CAPITAL LETTER AE
- 0x00C7: LATIN CAPITAL LETTER C WITH CEDILLA
- 0x00C8: LATIN CAPITAL LETTER E WITH GRAVE
- 0x00C9: LATIN CAPITAL LETTER E WITH ACUTE
- 0x00CA: LATIN CAPITAL LETTER E WITH CIRCUMFLEX
- 0x00CB: LATIN CAPITAL LETTER E WITH DIAERESIS
- 0x00CC: LATIN CAPITAL LETTER I WITH GRAVE
- 0x00CD: LATIN CAPITAL LETTER I WITH ACUTE
- 0x00CE: LATIN CAPITAL LETTER I WITH CIRCUMFLEX
- 0x00CF: LATIN CAPITAL LETTER I WITH DIAERESIS
- 0x00D0: LATIN CAPITAL LETTER ETH
- 0x00D1: LATIN CAPITAL LETTER N WITH TILDE
- 0x00D2: LATIN CAPITAL LETTER O WITH GRAVE
- 0x00D3: LATIN CAPITAL LETTER O WITH ACUTE
- 0x00D4: LATIN CAPITAL LETTER O WITH CIRCUMFLEX
- 0x00D5: LATIN CAPITAL LETTER O WITH TILDE
- 0x00D6: LATIN CAPITAL LETTER O WITH DIAERESIS
- 0x00D7: MULTIPLICATION SIGN
- 0x00D8: LATIN CAPITAL LETTER O WITH STROKE
- 0x00D9: LATIN CAPITAL LETTER U WITH GRAVE
- 0x00DA: LATIN CAPITAL LETTER U WITH ACUTE
- 0x00DB: LATIN CAPITAL LETTER U WITH CIRCUMFLEX
- 0x00DC: LATIN CAPITAL LETTER U WITH DIAERESIS
- 0x00DD: LATIN CAPITAL LETTER Y WITH ACUTE
- 0x00DE: LATIN CAPITAL LETTER THORN
- 0x00DF: LATIN SMALL LETTER SHARP S
- 0x00E0: LATIN SMALL LETTER A WITH GRAVE
- 0x00E1: LATIN SMALL LETTER A WITH ACUTE
- 0x00E2: LATIN SMALL LETTER A WITH CIRCUMFLEX
- 0x00E3: LATIN SMALL LETTER A WITH TILDE
- 0x00E4: LATIN SMALL LETTER A WITH DIAERESIS
- 0x00E5: LATIN SMALL LETTER A WITH RING ABOVE
- 0x00E6: LATIN SMALL LETTER AE
- 0x00E7: LATIN SMALL LETTER C WITH CEDILLA
- 0x00E8: LATIN SMALL LETTER E WITH GRAVE
- 0x00E9: LATIN SMALL LETTER E WITH ACUTE
- 0x00EA: LATIN SMALL LETTER E WITH CIRCUMFLEX
- 0x00EB: LATIN SMALL LETTER E WITH DIAERESIS
- 0x00EC: LATIN SMALL LETTER I WITH GRAVE
- 0x00ED: LATIN SMALL LETTER I WITH ACUTE
- 0x00EE: LATIN SMALL LETTER I WITH CIRCUMFLEX
- 0x00EF: LATIN SMALL LETTER I WITH DIAERESIS
- 0x00F0: LATIN SMALL LETTER ETH
- 0x00F1: LATIN SMALL LETTER N WITH TILDE
- 0x00F2: LATIN SMALL LETTER O WITH GRAVE
- 0x00F3: LATIN SMALL LETTER O WITH ACUTE
- 0x00F4: LATIN SMALL LETTER O WITH CIRCUMFLEX
- 0x00F5: LATIN SMALL LETTER O WITH TILDE
- 0x00F6: LATIN SMALL LETTER O WITH DIAERESIS
- 0x00F7: DIVISION SIGN
- 0x00F8: LATIN SMALL LETTER O WITH STROKE
- 0x00F9: LATIN SMALL LETTER U WITH GRAVE
- 0x00FA: LATIN SMALL LETTER U WITH ACUTE
- 0x00FB: LATIN SMALL LETTER U WITH CIRCUMFLEX
- 0x00FC: LATIN SMALL LETTER U WITH DIAERESIS
- 0x00FD: LATIN SMALL LETTER Y WITH ACUTE
- 0x00FE: LATIN SMALL LETTER THORN
- 0x00FF: LATIN SMALL LETTER Y WITH DIAERESIS
- 0x0100: LATIN CAPITAL LETTER A WITH MACRON
- 0x0101: LATIN SMALL LETTER A WITH MACRON
- 0x0102: LATIN CAPITAL LETTER A WITH BREVE
- 0x0103: LATIN SMALL LETTER A WITH BREVE
- 0x0104: LATIN CAPITAL LETTER A WITH OGONEK
- 0x0105: LATIN SMALL LETTER A WITH OGONEK
- 0x0106: LATIN CAPITAL LETTER C WITH ACUTE
- 0x0107: LATIN SMALL LETTER C WITH ACUTE
- 0x010A: LATIN CAPITAL LETTER C WITH DOT ABOVE
- 0x010B: LATIN SMALL LETTER C WITH DOT ABOVE
- 0x010C: LATIN CAPITAL LETTER C WITH CARON
- 0x010D: LATIN SMALL LETTER C WITH CARON
- 0x010E: LATIN CAPITAL LETTER D WITH CARON
- 0x010F: LATIN SMALL LETTER D WITH CARON
- 0x0110: LATIN CAPITAL LETTER D WITH STROKE
- 0x0111: LATIN SMALL LETTER D WITH STROKE
- 0x0112: LATIN CAPITAL LETTER E WITH MACRON
- 0x0113: LATIN SMALL LETTER E WITH MACRON
- 0x0116: LATIN CAPITAL LETTER E WITH DOT ABOVE
- 0x0117: LATIN SMALL LETTER E WITH DOT ABOVE
- 0x0118: LATIN CAPITAL LETTER E WITH OGONEK
- 0x0119: LATIN SMALL LETTER E WITH OGONEK
- 0x011A: LATIN CAPITAL LETTER E WITH CARON
- 0x011B: LATIN SMALL LETTER E WITH CARON
- 0x011E: LATIN CAPITAL LETTER G WITH BREVE
- 0x011F: LATIN SMALL LETTER G WITH BREVE
- 0x0120: LATIN CAPITAL LETTER G WITH DOT ABOVE
- 0x0121: LATIN SMALL LETTER G WITH DOT ABOVE
- 0x0122: LATIN CAPITAL LETTER G WITH CEDILLA
- 0x0123: LATIN SMALL LETTER G WITH CEDILLA
- 0x0126: LATIN CAPITAL LETTER H WITH STROKE
- 0x0127: LATIN SMALL LETTER H WITH STROKE
- 0x012A: LATIN CAPITAL LETTER I WITH MACRON
- 0x012B: LATIN SMALL LETTER I WITH MACRON
- 0x012E: LATIN CAPITAL LETTER I WITH OGONEK
- 0x012F: LATIN SMALL LETTER I WITH OGONEK
- 0x0130: LATIN CAPITAL LETTER I WITH DOT ABOVE
- 0x0131: LATIN SMALL LETTER DOTLESS I
- 0x0136: LATIN CAPITAL LETTER K WITH CEDILLA
- 0x0137: LATIN SMALL LETTER K WITH CEDILLA
- 0x0139: LATIN CAPITAL LETTER L WITH ACUTE
- 0x013A: LATIN SMALL LETTER L WITH ACUTE
- 0x013B: LATIN CAPITAL LETTER L WITH CEDILLA
- 0x013C: LATIN SMALL LETTER L WITH CEDILLA
- 0x013D: LATIN CAPITAL LETTER L WITH CARON
- 0x013E: LATIN SMALL LETTER L WITH CARON
- 0x0141: LATIN CAPITAL LETTER L WITH STROKE
- 0x0142: LATIN SMALL LETTER L WITH STROKE
- 0x0143: LATIN CAPITAL LETTER N WITH ACUTE
- 0x0144: LATIN SMALL LETTER N WITH ACUTE
- 0x0145: LATIN CAPITAL LETTER N WITH CEDILLA
- 0x0146: LATIN SMALL LETTER N WITH CEDILLA
- 0x0147: LATIN CAPITAL LETTER N WITH CARON
- 0x0148: LATIN SMALL LETTER N WITH CARON
- 0x0150: LATIN CAPITAL LETTER O WITH DOUBLE ACUTE
- 0x0151: LATIN SMALL LETTER O WITH DOUBLE ACUTE
- 0x0152: LATIN CAPITAL LIGATURE OE
- 0x0153: LATIN SMALL LIGATURE OE
- 0x0154: LATIN CAPITAL LETTER R WITH ACUTE
- 0x0155: LATIN SMALL LETTER R WITH ACUTE
- 0x0158: LATIN CAPITAL LETTER R WITH CARON
- 0x0159: LATIN SMALL LETTER R WITH CARON
- 0x015A: LATIN CAPITAL LETTER S WITH ACUTE
- 0x015B: LATIN SMALL LETTER S WITH ACUTE
- 0x015E: LATIN CAPITAL LETTER S WITH CEDILLA
- 0x015F: LATIN SMALL LETTER S WITH CEDILLA
- 0x0160: LATIN CAPITAL LETTER S WITH CARON
- 0x0161: LATIN SMALL LETTER S WITH CARON
- 0x0164: LATIN CAPITAL LETTER T WITH CARON
- 0x0165: LATIN SMALL LETTER T WITH CARON
- 0x016A: LATIN CAPITAL LETTER U WITH MACRON
- 0x016B: LATIN SMALL LETTER U WITH MACRON
- 0x016E: LATIN CAPITAL LETTER U WITH RING ABOVE
- 0x016F: LATIN SMALL LETTER U WITH RING ABOVE
- 0x0170: LATIN CAPITAL LETTER U WITH DOUBLE ACUTE
- 0x0171: LATIN SMALL LETTER U WITH DOUBLE ACUTE
- 0x0172: LATIN CAPITAL LETTER U WITH OGONEK
- 0x0173: LATIN SMALL LETTER U WITH OGONEK
- 0x0174: LATIN CAPITAL LETTER W WITH CIRCUMFLEX
- 0x0175: LATIN SMALL LETTER W WITH CIRCUMFLEX
- 0x0176: LATIN CAPITAL LETTER Y WITH CIRCUMFLEX
- 0x0177: LATIN SMALL LETTER Y WITH CIRCUMFLEX
- 0x0178: LATIN CAPITAL LETTER Y WITH DIAERESIS
- 0x0179: LATIN CAPITAL LETTER Z WITH ACUTE
- 0x017A: LATIN SMALL LETTER Z WITH ACUTE
- 0x017B: LATIN CAPITAL LETTER Z WITH DOT ABOVE
- 0x017C: LATIN SMALL LETTER Z WITH DOT ABOVE
- 0x017D: LATIN CAPITAL LETTER Z WITH CARON
- 0x017E: LATIN SMALL LETTER Z WITH CARON
- 0x0218: LATIN CAPITAL LETTER S WITH COMMA BELOW
- 0x0219: LATIN SMALL LETTER S WITH COMMA BELOW
- 0x021A: LATIN CAPITAL LETTER T WITH COMMA BELOW
- 0x021B: LATIN SMALL LETTER T WITH COMMA BELOW
- 0x0237: LATIN SMALL LETTER DOTLESS J
- 0x02C6: MODIFIER LETTER CIRCUMFLEX ACCENT
- 0x02C7: CARON
- 0x02D8: BREVE
- 0x02D9: DOT ABOVE
- 0x02DA: RING ABOVE
- 0x02DB: OGONEK
- 0x02DC: SMALL TILDE
- 0x02DD: DOUBLE ACUTE ACCENT
- 0x0300: COMBINING GRAVE ACCENT
- 0x0301: COMBINING ACUTE ACCENT
- 0x0302: COMBINING CIRCUMFLEX ACCENT
- 0x0303: COMBINING TILDE
- 0x0304: COMBINING MACRON
- 0x0306: COMBINING BREVE
- 0x0307: COMBINING DOT ABOVE
- 0x0308: COMBINING DIAERESIS
- 0x030A: COMBINING RING ABOVE
- 0x030B: COMBINING DOUBLE ACUTE ACCENT
- 0x030C: COMBINING CARON
- 0x0326: COMBINING COMMA BELOW
- 0x0327: COMBINING CEDILLA
- 0x0328: COMBINING OGONEK
- 0x1E80: LATIN CAPITAL LETTER W WITH GRAVE
- 0x1E81: LATIN SMALL LETTER W WITH GRAVE
- 0x1E82: LATIN CAPITAL LETTER W WITH ACUTE
- 0x1E83: LATIN SMALL LETTER W WITH ACUTE
- 0x1E84: LATIN CAPITAL LETTER W WITH DIAERESIS
- 0x1E85: LATIN SMALL LETTER W WITH DIAERESIS
- 0x1E9E: LATIN CAPITAL LETTER SHARP S
- 0x1EF2: LATIN CAPITAL LETTER Y WITH GRAVE
- 0x1EF3: LATIN SMALL LETTER Y WITH GRAVE
- 0x2013: EN DASH
- 0x2014: EM DASH
- 0x2018: LEFT SINGLE QUOTATION MARK
- 0x2019: RIGHT SINGLE QUOTATION MARK
- 0x201A: SINGLE LOW-9 QUOTATION MARK
- 0x201C: LEFT DOUBLE QUOTATION MARK
- 0x201D: RIGHT DOUBLE QUOTATION MARK
- 0x201E: DOUBLE LOW-9 QUOTATION MARK
- 0x2022: BULLET
- 0x2039: SINGLE LEFT-POINTING ANGLE QUOTATION MARK
- 0x203A: SINGLE RIGHT-POINTING ANGLE QUOTATION MARK
- 0x20AC: EURO SIGN
- 0x2122: TRADE MARK SIGN
- 0x2212: MINUS SIGN
Ensure fonts have ScriptLangTags declared on the 'meta' table.
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
This font file does not have a 'meta' table.
[code: lacks-meta-table]
Description strings in the name table must not exceed 200 characters.
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
A few name table entries with ID=10 (NameID.DESCRIPTION) are longer than 200 characters. Please check whether those entries are copyright notices mistakenly stored in the description string entries by a bug in an old FontLab version. If that's the case, then such copyright notices must be removed from these entries.
[code: too-long]
Version format is correct in 'name' table?
đĨ GalleCANARY-Regular.ttf
-
đĨ FAIL
The NameID.VERSION_STRING (nameID=5) value must follow the pattern "Version X.Y" with X.Y greater than or equal to 1.000.
The "Version" prefix is a recommendation given by the OpenType spec.
Current version string is: "Version 0.060; [28c9ea3]-dev"
[code: bad-version-strings] -
đĨ FAIL
The NameID.VERSION_STRING (nameID=5) value must follow the pattern "Version X.Y" with X.Y greater than or equal to 1.000.
The "Version" prefix is a recommendation given by the OpenType spec.
Current version string is: "Version 0.060; [28c9ea3]-dev"
[code: bad-version-strings]
Ensure font can render its own name.
đĨ GalleCANARY-Regular.ttf
-
đĨ FAIL
.notdef glyphs were found when attempting to render Galle CANARY
[code: render-own-name]
OS/2.fsSelection bit 7 (USE_TYPO_METRICS) is set in all fonts.
đĨ GalleCANARY-Regular.ttf
-
đĨ FAIL
OS/2.fsSelection bit 7 (USE_TYPO_METRICS) was NOT set.
[code: missing-os2-fsselection-bit7]
Checking OS/2 achVendID.
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
OS/2 VendorID value 'MNIK' is not yet recognized. If you registered it recently, then it's safe to ignore this warning message. Otherwise, you should set it to your own unique 4 character code, and register it with Microsoft at https://www.microsoft.com/typography/links/vendorlist.aspx
[code: unknown]
Check font follows the Google Fonts vertical metric schema
đĨ GalleCANARY-Regular.ttf
-
đĨ FAIL
OS/2.sTypoLineGap is 463; it should be 0
[code: bad-OS/2.sTypoLineGap]
Shaping Checks
Ensure dotted circle glyph is present and can attach marks.
đĨ GalleCANARY-Regular.ttf
-
đĨ ERROR
Error: Error reading font file: the GPOS table is missing
Outline Checks
Do any segments have colinear vectors?
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
The following glyphs have colinear vectors:
- kha_rephasinh: from (152.0, 512.0) to (155.0, 512.0) is colinear with segment from (155.0, 512.0) to (159.0, 512.0)
- nndda_rephasinh: from (236.0, 512.0) to (237.0, 512.0) is colinear with segment from (237.0, 512.0) to (238.0, 512.0)
- nndda_rephasinh: from (237.0, 512.0) to (238.0, 512.0) is colinear with segment from (238.0, 512.0) to (238.0, 512.0)
- nndda_rephasinh: from (238.0, 512.0) to (238.0, 512.0) is colinear with segment from (238.0, 512.0) to (238.0, 512.0)
- dha_rephasinh: from (149.0, 512.0) to (152.0, 512.0) is colinear with segment from (152.0, 512.0) to (153.0, 512.0)
- dha_rephasinh: from (152.0, 512.0) to (153.0, 512.0) is colinear with segment from (153.0, 512.0) to (158.0, 512.0)
- bIisinh: from (293.0, 414.0) to (296.0, 414.0) is colinear with segment from (296.0, 414.0) to (296.0, 414.0)
- rAaesinh: from (210.0, 593.0) to (211.0, 590.0) is colinear with segment from (211.0, 590.0) to (234.0, 536.0)
- u111E7 (U+111E7): from (452.0, -7.0) to (451.0, -7.0) is colinear with segment from (451.0, -7.0) to (400.0, -7.0)
- u111E8 (U+111E8): from (199.0, -114.0) to (199.0, -114.0) is colinear with segment from (199.0, -114.0) to (199.0, -114.0)
- bRIisinh: from (293.0, 414.0) to (296.0, 414.0) is colinear with segment from (296.0, 414.0) to (296.0, 414.0)
- dhU_rephasinh: from (149.0, 512.0) to (152.0, 512.0) is colinear with segment from (152.0, 512.0) to (153.0, 512.0)
- dhU_rephasinh: from (152.0, 512.0) to (153.0, 512.0) is colinear with segment from (153.0, 512.0) to (158.0, 512.0)
- dhUu_rephasinh: from (149.0, 512.0) to (152.0, 512.0) is colinear with segment from (152.0, 512.0) to (153.0, 512.0)
- dhUu_rephasinh: from (152.0, 512.0) to (153.0, 512.0) is colinear with segment from (153.0, 512.0) to (158.0, 512.0)
- gRIsinh: from (371.0, 298.0) to (371.0, 298.0) is colinear with segment from (371.0, 298.0) to (371.0, 298.0)
- kIisinh: from (326.0, 331.0) to (326.0, 331.0) is colinear with segment from (326.0, 331.0) to (328.0, 331.0)
- khU_rephasinh: from (152.0, 512.0) to (155.0, 512.0) is colinear with segment from (155.0, 512.0) to (159.0, 512.0)
- khUusinh: from (448.0, 100.0) to (448.0, 99.0) is colinear with segment from (448.0, 99.0) to (448.0, -248.0)
- khUu_rephasinh: from (453.0, 100.0) to (453.0, 99.0) is colinear with segment from (453.0, 99.0) to (453.0, -248.0)
- khUu_rephasinh: from (152.0, 512.0) to (155.0, 512.0) is colinear with segment from (155.0, 512.0) to (159.0, 512.0)
- nIsinh: from (340.0, 330.0) to (341.0, 330.0) is colinear with segment from (341.0, 330.0) to (341.0, 330.0)
- sIsinh: from (360.0, 285.0) to (360.0, 287.0) is colinear with segment from (360.0, 287.0) to (360.0, 290.0)
- sIsinh: from (360.0, 287.0) to (360.0, 290.0) is colinear with segment from (360.0, 290.0) to (360.0, 291.0)
- sRIsinh: from (381.0, 285.0) to (381.0, 287.0) is colinear with segment from (381.0, 287.0) to (381.0, 290.0)
- sRIsinh: from (381.0, 287.0) to (381.0, 290.0) is colinear with segment from (381.0, 290.0) to (381.0, 291.0)
- yIsinh: from (364.0, 320.0) to (364.0, 322.0) is colinear with segment from (364.0, 322.0) to (364.0, 324.0)
- yIisinh: from (364.0, 316.0) to (364.0, 318.0) is colinear with segment from (364.0, 318.0) to (364.0, 319.0)
Do outlines contain any jaggy segments?
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
The following glyphs have jaggy segments:
- uni0D8A (U+0D8A): Quad(QuadBez { p0: (144.5, 377.5), p1: (113.0, 338.0), p2: (96.0, 312.0) })/Quad(QuadBez { p0: (96.0, 312.0), p1: (110.0, 326.0), p2: (134.5, 337.5) }) = 11.821488340607257 degrees
- uni0D9D (U+0D9D): Quad(QuadBez { p0: (71.5, 236.0), p1: (92.0, 250.0), p2: (106.0, 250.0) })/Quad(QuadBez { p0: (106.0, 250.0), p1: (100.0, 251.0), p2: (95.0, 251.0) }) = 9.462322208025613 degrees
- uni0DA9 (U+0DA9): Quad(QuadBez { p0: (71.5, 230.5), p1: (92.0, 243.0), p2: (106.0, 243.0) })/Quad(QuadBez { p0: (106.0, 243.0), p1: (100.0, 244.0), p2: (95.0, 244.0) }) = 9.462322208025613 degrees
- uni0DAA (U+0DAA): Quad(QuadBez { p0: (77.5, 224.0), p1: (99.0, 237.0), p2: (114.0, 237.0) })/Quad(QuadBez { p0: (114.0, 237.0), p1: (107.0, 238.0), p2: (101.0, 238.0) }) = 8.130102354156005 degrees
- uni0DB3 (U+0DB3): Quad(QuadBez { p0: (285.0, 298.5), p1: (297.0, 292.0), p2: (300.0, 289.0) })/Quad(QuadBez { p0: (300.0, 289.0), p1: (295.0, 297.0), p2: (295.0, 307.0) }) = 12.994616791916483 degrees
- uni0DC2 (U+0DC2): Quad(QuadBez { p0: (344.0, 269.0), p1: (334.0, 259.0), p2: (320.0, 257.0) })/Quad(QuadBez { p0: (320.0, 257.0), p1: (366.0, 257.0), p2: (392.5, 224.5) }) = 8.130102354156005 degrees
- bhU_rephasinh: Quad(QuadBez { p0: (83.5, 235.0), p1: (97.0, 246.0), p2: (106.0, 246.0) })/Quad(QuadBez { p0: (106.0, 246.0), p1: (100.0, 247.0), p2: (94.5, 247.0) }) = 9.462322208025574 degrees
- bhUu_rephasinh: Quad(QuadBez { p0: (83.5, 235.0), p1: (97.0, 246.0), p2: (106.0, 246.0) })/Quad(QuadBez { p0: (106.0, 246.0), p1: (100.0, 247.0), p2: (94.5, 247.0) }) = 9.462322208025574 degrees
- gUu_rephasinh: Quad(QuadBez { p0: (356.0, 1.0), p1: (338.0, -2.0), p2: (323.0, 0.0) })/Quad(QuadBez { p0: (323.0, 0.0), p1: (334.0, -4.0), p2: (346.0, -7.5) }) = 12.388463153308553 degrees
- gha_rephasinh: Quad(QuadBez { p0: (71.5, 236.0), p1: (92.0, 250.0), p2: (106.0, 250.0) })/Quad(QuadBez { p0: (106.0, 250.0), p1: (100.0, 251.0), p2: (95.0, 251.0) }) = 9.462322208025613 degrees
- cha_rephasinh: Quad(QuadBez { p0: (362.5, 221.0), p1: (349.0, 246.0), p2: (326.0, 254.0) })/Quad(QuadBez { p0: (326.0, 254.0), p1: (337.0, 247.0), p2: (341.0, 236.0) }) = 13.2921842650378 degrees
- cha_rephasinh: Quad(QuadBez { p0: (326.5, 295.5), p1: (319.0, 286.0), p2: (302.0, 279.0) })/Quad(QuadBez { p0: (302.0, 279.0), p1: (313.0, 281.0), p2: (330.0, 279.0) }) = 12.075288583193561 degrees
- dda_rephasinh: Quad(QuadBez { p0: (71.5, 230.5), p1: (92.0, 243.0), p2: (106.0, 243.0) })/Quad(QuadBez { p0: (106.0, 243.0), p1: (100.0, 244.0), p2: (95.0, 244.0) }) = 9.462322208025613 degrees
- ddha_rephasinh: Quad(QuadBez { p0: (77.5, 225.0), p1: (99.0, 237.0), p2: (114.0, 237.0) })/Quad(QuadBez { p0: (114.0, 237.0), p1: (107.0, 238.0), p2: (101.0, 238.0) }) = 8.130102354156005 degrees
- nna_rephasinh: Quad(QuadBez { p0: (393.0, 246.0), p1: (393.0, 233.0), p2: (396.0, 210.0) })/Line(Line { p0: (396.0, 210.0), p1: (396.0, 212.0) }) = 7.431407971172489 degrees
- nna_rephasinh: Line(Line { p0: (396.0, 210.0), p1: (396.0, 212.0) })/Quad(QuadBez { p0: (396.0, 212.0), p1: (399.0, 193.0), p2: (399.0, 173.0) }) = 8.972626614896358 degrees
- nda_rephasinh: Quad(QuadBez { p0: (324.0, 298.5), p1: (336.0, 292.0), p2: (339.0, 289.0) })/Quad(QuadBez { p0: (339.0, 289.0), p1: (334.0, 297.0), p2: (334.0, 307.0) }) = 12.994616791916483 degrees
- ssa_rephasinh: Quad(QuadBez { p0: (373.0, 269.0), p1: (363.0, 259.0), p2: (349.0, 257.0) })/Quad(QuadBez { p0: (349.0, 257.0), p1: (395.0, 257.0), p2: (421.5, 224.5) }) = 8.130102354156005 degrees
- bhUsinh: Quad(QuadBez { p0: (83.5, 235.0), p1: (97.0, 246.0), p2: (106.0, 246.0) })/Quad(QuadBez { p0: (106.0, 246.0), p1: (100.0, 247.0), p2: (94.5, 247.0) }) = 9.462322208025574 degrees
- bhUusinh: Quad(QuadBez { p0: (83.5, 235.0), p1: (97.0, 246.0), p2: (106.0, 246.0) })/Quad(QuadBez { p0: (106.0, 246.0), p1: (100.0, 247.0), p2: (94.5, 247.0) }) = 9.462322208025574 degrees
- chsinh: Quad(QuadBez { p0: (334.0, 293.0), p1: (334.0, 276.0), p2: (308.0, 267.0) })/Quad(QuadBez { p0: (308.0, 267.0), p1: (318.0, 269.0), p2: (333.0, 266.5) }) = 7.7835595264653525 degrees
- dRasinh: Quad(QuadBez { p0: (211.5, 298.5), p1: (224.0, 292.0), p2: (227.0, 289.0) })/Quad(QuadBez { p0: (227.0, 289.0), p1: (222.0, 297.0), p2: (222.0, 305.0) }) = 12.994616791916483 degrees
- ddsinh: Quad(QuadBez { p0: (71.5, 230.5), p1: (92.0, 243.0), p2: (106.0, 243.0) })/Quad(QuadBez { p0: (106.0, 243.0), p1: (100.0, 244.0), p2: (95.0, 244.0) }) = 9.462322208025613 degrees
- ddIsinh: Quad(QuadBez { p0: (71.5, 233.5), p1: (92.0, 246.0), p2: (106.0, 246.0) })/Quad(QuadBez { p0: (106.0, 246.0), p1: (100.0, 247.0), p2: (95.0, 247.0) }) = 9.462322208025613 degrees
- ddIisinh: Quad(QuadBez { p0: (359.0, 415.0), p1: (355.0, 405.0), p2: (346.0, 396.0) })/Quad(QuadBez { p0: (346.0, 396.0), p1: (383.0, 419.0), p2: (383.0, 465.0) }) = 13.134022306396298 degrees
- ddIisinh: Quad(QuadBez { p0: (71.5, 233.5), p1: (92.0, 246.0), p2: (106.0, 246.0) })/Quad(QuadBez { p0: (106.0, 246.0), p1: (100.0, 247.0), p2: (95.0, 247.0) }) = 9.462322208025613 degrees
- ddhsinh: Quad(QuadBez { p0: (77.5, 224.0), p1: (99.0, 237.0), p2: (114.0, 237.0) })/Quad(QuadBez { p0: (114.0, 237.0), p1: (107.0, 238.0), p2: (101.0, 238.0) }) = 8.130102354156005 degrees
- ddhIsinh: Quad(QuadBez { p0: (77.5, 225.0), p1: (99.0, 237.0), p2: (114.0, 237.0) })/Quad(QuadBez { p0: (114.0, 237.0), p1: (107.0, 238.0), p2: (101.0, 238.0) }) = 8.130102354156005 degrees
- ddhIisinh: Quad(QuadBez { p0: (77.5, 225.0), p1: (99.0, 237.0), p2: (114.0, 237.0) })/Quad(QuadBez { p0: (114.0, 237.0), p1: (107.0, 238.0), p2: (101.0, 238.0) }) = 8.130102354156005 degrees
- gUusinh: Quad(QuadBez { p0: (356.0, 1.0), p1: (338.0, -2.0), p2: (323.0, 0.0) })/Quad(QuadBez { p0: (323.0, 0.0), p1: (334.0, -4.0), p2: (346.0, -7.5) }) = 12.388463153308553 degrees
- ndUsinh: Quad(QuadBez { p0: (285.0, 298.5), p1: (297.0, 292.0), p2: (300.0, 289.0) })/Quad(QuadBez { p0: (300.0, 289.0), p1: (292.0, 301.0), p2: (298.0, 317.0) }) = 11.309932474020162 degrees
- ndUusinh: Quad(QuadBez { p0: (285.0, 298.5), p1: (297.0, 292.0), p2: (300.0, 289.0) })/Quad(QuadBez { p0: (300.0, 289.0), p1: (292.0, 301.0), p2: (298.0, 317.0) }) = 11.309932474020162 degrees
- nnddIisinh: Quad(QuadBez { p0: (453.0, 415.0), p1: (449.0, 405.0), p2: (440.0, 396.0) })/Quad(QuadBez { p0: (440.0, 396.0), p1: (477.0, 419.0), p2: (477.0, 465.0) }) = 13.134022306396298 degrees
- rsinh: Quad(QuadBez { p0: (132.0, 357.5), p1: (101.0, 330.0), p2: (87.0, 314.0) })/Quad(QuadBez { p0: (87.0, 314.0), p1: (108.0, 334.0), p2: (136.0, 346.0) }) = 5.2112558615867774 degrees
- rAaesinh: Quad(QuadBez { p0: (189.5, 597.0), p1: (190.0, 597.0), p2: (188.0, 596.0) })/Quad(QuadBez { p0: (188.0, 596.0), p1: (197.0, 602.0), p2: (204.0, 599.0) }) = 7.125016348901859 degrees
- rIsinh: Quad(QuadBez { p0: (132.0, 357.5), p1: (101.0, 330.0), p2: (87.0, 314.0) })/Quad(QuadBez { p0: (87.0, 314.0), p1: (108.0, 333.0), p2: (136.0, 345.5) }) = 6.676480060402135 degrees
- rIisinh: Quad(QuadBez { p0: (135.0, 357.5), p1: (104.0, 330.0), p2: (90.0, 314.0) })/Quad(QuadBez { p0: (90.0, 314.0), p1: (111.0, 333.0), p2: (139.0, 345.5) }) = 6.676480060402135 degrees
- uusignsinh.alt: Quad(QuadBez { p0: (-284.0, -83.0), p1: (-281.0, -83.0), p2: (-278.0, -84.0) })/Quad(QuadBez { p0: (-278.0, -84.0), p1: (-284.0, -82.0), p2: (-298.5, -75.0) }) = 0.0000012074182697257333 degrees
- chRsinh: Quad(QuadBez { p0: (334.0, 293.0), p1: (334.0, 276.0), p2: (308.0, 267.0) })/Quad(QuadBez { p0: (308.0, 267.0), p1: (318.0, 269.0), p2: (333.0, 266.5) }) = 7.7835595264653525 degrees
- chU_rephasinh: Quad(QuadBez { p0: (362.5, 221.0), p1: (349.0, 246.0), p2: (326.0, 254.0) })/Quad(QuadBez { p0: (326.0, 254.0), p1: (337.0, 247.0), p2: (341.0, 236.0) }) = 13.2921842650378 degrees
- chU_rephasinh: Quad(QuadBez { p0: (326.5, 295.5), p1: (319.0, 286.0), p2: (302.0, 279.0) })/Quad(QuadBez { p0: (302.0, 279.0), p1: (313.0, 281.0), p2: (330.0, 279.0) }) = 12.075288583193561 degrees
- chUu_rephasinh: Quad(QuadBez { p0: (362.5, 221.0), p1: (349.0, 246.0), p2: (326.0, 254.0) })/Quad(QuadBez { p0: (326.0, 254.0), p1: (337.0, 247.0), p2: (341.0, 236.0) }) = 13.2921842650378 degrees
- chUu_rephasinh: Quad(QuadBez { p0: (326.5, 295.5), p1: (319.0, 286.0), p2: (302.0, 279.0) })/Quad(QuadBez { p0: (302.0, 279.0), p1: (313.0, 281.0), p2: (330.0, 279.0) }) = 12.075288583193561 degrees
- dRsinh: Quad(QuadBez { p0: (211.5, 298.5), p1: (224.0, 292.0), p2: (227.0, 289.0) })/Quad(QuadBez { p0: (227.0, 289.0), p1: (222.0, 297.0), p2: (222.0, 305.0) }) = 12.994616791916483 degrees
- dRIsinh: Quad(QuadBez { p0: (211.5, 298.5), p1: (224.0, 292.0), p2: (227.0, 289.0) })/Quad(QuadBez { p0: (227.0, 289.0), p1: (222.0, 297.0), p2: (222.0, 305.0) }) = 12.994616791916483 degrees
- dRIisinh: Quad(QuadBez { p0: (211.5, 298.5), p1: (224.0, 292.0), p2: (227.0, 289.0) })/Quad(QuadBez { p0: (227.0, 289.0), p1: (222.0, 297.0), p2: (222.0, 305.0) }) = 12.994616791916483 degrees
- ddRsinh: Quad(QuadBez { p0: (71.5, 230.5), p1: (92.0, 243.0), p2: (106.0, 243.0) })/Quad(QuadBez { p0: (106.0, 243.0), p1: (100.0, 244.0), p2: (95.0, 244.0) }) = 9.462322208025613 degrees
- ddRIsinh: Quad(QuadBez { p0: (71.5, 233.5), p1: (92.0, 246.0), p2: (106.0, 246.0) })/Quad(QuadBez { p0: (106.0, 246.0), p1: (100.0, 247.0), p2: (95.0, 247.0) }) = 9.462322208025613 degrees
- ddRIisinh: Quad(QuadBez { p0: (359.0, 415.0), p1: (355.0, 405.0), p2: (346.0, 396.0) })/Quad(QuadBez { p0: (346.0, 396.0), p1: (383.0, 419.0), p2: (383.0, 465.0) }) = 13.134022306396298 degrees
- ddRIisinh: Quad(QuadBez { p0: (71.5, 233.5), p1: (92.0, 246.0), p2: (106.0, 246.0) })/Quad(QuadBez { p0: (106.0, 246.0), p1: (100.0, 247.0), p2: (95.0, 247.0) }) = 9.462322208025613 degrees
- ddRasinh: Quad(QuadBez { p0: (71.5, 230.5), p1: (92.0, 243.0), p2: (106.0, 243.0) })/Quad(QuadBez { p0: (106.0, 243.0), p1: (100.0, 244.0), p2: (95.0, 244.0) }) = 9.462322208025613 degrees
- ddUsinh: Quad(QuadBez { p0: (71.5, 230.5), p1: (92.0, 243.0), p2: (106.0, 243.0) })/Quad(QuadBez { p0: (106.0, 243.0), p1: (100.0, 244.0), p2: (95.0, 244.0) }) = 9.462322208025613 degrees
- ddU_rephasinh: Quad(QuadBez { p0: (71.5, 230.5), p1: (92.0, 243.0), p2: (106.0, 243.0) })/Quad(QuadBez { p0: (106.0, 243.0), p1: (100.0, 244.0), p2: (95.0, 244.0) }) = 9.462322208025613 degrees
- ddUusinh: Quad(QuadBez { p0: (71.5, 230.5), p1: (92.0, 243.0), p2: (106.0, 243.0) })/Quad(QuadBez { p0: (106.0, 243.0), p1: (100.0, 244.0), p2: (95.0, 244.0) }) = 9.462322208025613 degrees
- ddUu_rephasinh: Quad(QuadBez { p0: (71.5, 230.5), p1: (92.0, 243.0), p2: (106.0, 243.0) })/Quad(QuadBez { p0: (106.0, 243.0), p1: (100.0, 244.0), p2: (95.0, 244.0) }) = 9.462322208025613 degrees
- ddhRsinh: Quad(QuadBez { p0: (77.5, 224.0), p1: (99.0, 237.0), p2: (114.0, 237.0) })/Quad(QuadBez { p0: (114.0, 237.0), p1: (107.0, 238.0), p2: (101.0, 238.0) }) = 8.130102354156005 degrees
- ddhRIsinh: Quad(QuadBez { p0: (77.5, 224.0), p1: (99.0, 237.0), p2: (114.0, 237.0) })/Quad(QuadBez { p0: (114.0, 237.0), p1: (107.0, 238.0), p2: (101.0, 238.0) }) = 8.130102354156005 degrees
- ddhRIisinh: Quad(QuadBez { p0: (77.5, 224.0), p1: (99.0, 237.0), p2: (114.0, 237.0) })/Quad(QuadBez { p0: (114.0, 237.0), p1: (107.0, 238.0), p2: (101.0, 238.0) }) = 8.130102354156005 degrees
- ddhRasinh: Quad(QuadBez { p0: (77.5, 224.0), p1: (99.0, 237.0), p2: (114.0, 237.0) })/Quad(QuadBez { p0: (114.0, 237.0), p1: (107.0, 238.0), p2: (101.0, 238.0) }) = 8.130102354156005 degrees
- ddhUsinh: Quad(QuadBez { p0: (77.5, 224.0), p1: (99.0, 237.0), p2: (114.0, 237.0) })/Quad(QuadBez { p0: (114.0, 237.0), p1: (107.0, 238.0), p2: (101.0, 238.0) }) = 8.130102354156005 degrees
- ddhU_rephasinh: Quad(QuadBez { p0: (77.5, 225.0), p1: (99.0, 237.0), p2: (114.0, 237.0) })/Quad(QuadBez { p0: (114.0, 237.0), p1: (107.0, 238.0), p2: (101.0, 238.0) }) = 8.130102354156005 degrees
- ddhUusinh: Quad(QuadBez { p0: (77.5, 224.0), p1: (99.0, 237.0), p2: (114.0, 237.0) })/Quad(QuadBez { p0: (114.0, 237.0), p1: (107.0, 238.0), p2: (101.0, 238.0) }) = 8.130102354156005 degrees
- ddhUu_rephasinh: Quad(QuadBez { p0: (77.5, 225.0), p1: (99.0, 237.0), p2: (114.0, 237.0) })/Quad(QuadBez { p0: (114.0, 237.0), p1: (107.0, 238.0), p2: (101.0, 238.0) }) = 8.130102354156005 degrees
- ghsinh: Quad(QuadBez { p0: (71.5, 236.0), p1: (92.0, 250.0), p2: (106.0, 250.0) })/Quad(QuadBez { p0: (106.0, 250.0), p1: (100.0, 251.0), p2: (95.0, 251.0) }) = 9.462322208025613 degrees
- ghIsinh: Quad(QuadBez { p0: (71.5, 236.0), p1: (92.0, 250.0), p2: (106.0, 250.0) })/Quad(QuadBez { p0: (106.0, 250.0), p1: (100.0, 251.0), p2: (95.0, 251.0) }) = 9.462322208025613 degrees
- ghIisinh: Quad(QuadBez { p0: (71.5, 236.0), p1: (92.0, 250.0), p2: (106.0, 250.0) })/Quad(QuadBez { p0: (106.0, 250.0), p1: (100.0, 251.0), p2: (95.0, 251.0) }) = 9.462322208025613 degrees
- ghRsinh: Quad(QuadBez { p0: (71.5, 236.0), p1: (92.0, 250.0), p2: (106.0, 250.0) })/Quad(QuadBez { p0: (106.0, 250.0), p1: (100.0, 251.0), p2: (95.0, 251.0) }) = 9.462322208025613 degrees
- ghRIsinh: Quad(QuadBez { p0: (71.5, 236.0), p1: (92.0, 250.0), p2: (106.0, 250.0) })/Quad(QuadBez { p0: (106.0, 250.0), p1: (100.0, 251.0), p2: (95.0, 251.0) }) = 9.462322208025613 degrees
- ghRIisinh: Quad(QuadBez { p0: (71.5, 236.0), p1: (92.0, 250.0), p2: (106.0, 250.0) })/Quad(QuadBez { p0: (106.0, 250.0), p1: (100.0, 251.0), p2: (95.0, 251.0) }) = 9.462322208025613 degrees
- ghRasinh: Quad(QuadBez { p0: (71.5, 236.0), p1: (92.0, 250.0), p2: (106.0, 250.0) })/Quad(QuadBez { p0: (106.0, 250.0), p1: (100.0, 251.0), p2: (95.0, 251.0) }) = 9.462322208025613 degrees
- ghUsinh: Quad(QuadBez { p0: (71.5, 236.0), p1: (92.0, 250.0), p2: (106.0, 250.0) })/Quad(QuadBez { p0: (106.0, 250.0), p1: (100.0, 251.0), p2: (95.0, 251.0) }) = 9.462322208025613 degrees
- ghU_rephasinh: Quad(QuadBez { p0: (71.5, 236.0), p1: (92.0, 250.0), p2: (106.0, 250.0) })/Quad(QuadBez { p0: (106.0, 250.0), p1: (100.0, 251.0), p2: (95.0, 251.0) }) = 9.462322208025613 degrees
- ghUusinh: Quad(QuadBez { p0: (71.5, 236.0), p1: (92.0, 250.0), p2: (106.0, 250.0) })/Quad(QuadBez { p0: (106.0, 250.0), p1: (100.0, 251.0), p2: (95.0, 251.0) }) = 9.462322208025613 degrees
- ghUu_rephasinh: Quad(QuadBez { p0: (71.5, 236.0), p1: (92.0, 250.0), p2: (106.0, 250.0) })/Quad(QuadBez { p0: (106.0, 250.0), p1: (100.0, 251.0), p2: (95.0, 251.0) }) = 9.462322208025613 degrees
- ndsinh: Quad(QuadBez { p0: (285.0, 298.5), p1: (297.0, 292.0), p2: (300.0, 289.0) })/Quad(QuadBez { p0: (300.0, 289.0), p1: (295.0, 297.0), p2: (295.0, 307.0) }) = 12.994616791916483 degrees
- ndIsinh: Quad(QuadBez { p0: (285.0, 298.5), p1: (297.0, 292.0), p2: (300.0, 289.0) })/Quad(QuadBez { p0: (300.0, 289.0), p1: (295.0, 297.0), p2: (295.0, 307.0) }) = 12.994616791916483 degrees
- ndIisinh: Quad(QuadBez { p0: (285.0, 298.5), p1: (297.0, 292.0), p2: (300.0, 289.0) })/Quad(QuadBez { p0: (300.0, 289.0), p1: (295.0, 297.0), p2: (295.0, 307.0) }) = 12.994616791916483 degrees
- nnAasinh: Quad(QuadBez { p0: (615.5, 318.5), p1: (632.0, 302.0), p2: (635.0, 279.0) })/Quad(QuadBez { p0: (635.0, 279.0), p1: (637.0, 302.0), p2: (654.5, 317.5) }) = 12.401148699282784 degrees
- nnIsinh: Quad(QuadBez { p0: (393.0, 246.0), p1: (393.0, 233.0), p2: (396.0, 213.0) })/Line(Line { p0: (396.0, 213.0), p1: (396.0, 214.0) }) = 8.530765609948139 degrees
- nnIsinh: Line(Line { p0: (396.0, 213.0), p1: (396.0, 214.0) })/Quad(QuadBez { p0: (396.0, 214.0), p1: (398.0, 205.0), p2: (399.0, 195.5) }) = 12.528807709151492 degrees
- nnIisinh: Quad(QuadBez { p0: (393.0, 246.0), p1: (393.0, 233.0), p2: (396.0, 213.0) })/Line(Line { p0: (396.0, 213.0), p1: (396.0, 214.0) }) = 8.530765609948139 degrees
- nnIisinh: Line(Line { p0: (396.0, 213.0), p1: (396.0, 214.0) })/Quad(QuadBez { p0: (396.0, 214.0), p1: (398.0, 205.0), p2: (399.0, 195.5) }) = 12.528807709151492 degrees
- nngUusinh: Quad(QuadBez { p0: (406.5, -0.5), p1: (399.0, 0.0), p2: (393.0, 1.0) })/Quad(QuadBez { p0: (393.0, 1.0), p1: (404.0, -3.0), p2: (416.5, -6.5) }) = 10.52078431387435 degrees
- sssinh: Quad(QuadBez { p0: (344.0, 269.0), p1: (334.0, 259.0), p2: (320.0, 257.0) })/Quad(QuadBez { p0: (320.0, 257.0), p1: (366.0, 257.0), p2: (392.5, 224.5) }) = 8.130102354156005 degrees
- ssIsinh: Quad(QuadBez { p0: (344.0, 269.0), p1: (334.0, 259.0), p2: (320.0, 257.0) })/Quad(QuadBez { p0: (320.0, 257.0), p1: (366.0, 257.0), p2: (392.5, 224.5) }) = 8.130102354156005 degrees
- ssIisinh: Quad(QuadBez { p0: (344.0, 269.0), p1: (334.0, 259.0), p2: (320.0, 257.0) })/Quad(QuadBez { p0: (320.0, 257.0), p1: (366.0, 257.0), p2: (392.5, 224.5) }) = 8.130102354156005 degrees
- ssRsinh: Quad(QuadBez { p0: (344.0, 269.0), p1: (334.0, 259.0), p2: (320.0, 257.0) })/Quad(QuadBez { p0: (320.0, 257.0), p1: (366.0, 257.0), p2: (392.5, 224.5) }) = 8.130102354156005 degrees
- ssRIsinh: Quad(QuadBez { p0: (344.0, 269.0), p1: (334.0, 259.0), p2: (320.0, 257.0) })/Quad(QuadBez { p0: (320.0, 257.0), p1: (366.0, 257.0), p2: (392.5, 224.5) }) = 8.130102354156005 degrees
- ssRIisinh: Quad(QuadBez { p0: (344.0, 269.0), p1: (334.0, 259.0), p2: (320.0, 257.0) })/Quad(QuadBez { p0: (320.0, 257.0), p1: (366.0, 257.0), p2: (392.5, 224.5) }) = 8.130102354156005 degrees
- ssRasinh: Quad(QuadBez { p0: (344.0, 269.0), p1: (334.0, 259.0), p2: (320.0, 257.0) })/Quad(QuadBez { p0: (320.0, 257.0), p1: (366.0, 257.0), p2: (392.5, 224.5) }) = 8.130102354156005 degrees
- ssUsinh: Quad(QuadBez { p0: (344.0, 269.0), p1: (334.0, 259.0), p2: (320.0, 257.0) })/Quad(QuadBez { p0: (320.0, 257.0), p1: (366.0, 257.0), p2: (392.5, 224.5) }) = 8.130102354156005 degrees
- ssU_rephasinh: Quad(QuadBez { p0: (373.0, 269.0), p1: (363.0, 259.0), p2: (349.0, 257.0) })/Quad(QuadBez { p0: (349.0, 257.0), p1: (395.0, 257.0), p2: (421.5, 224.5) }) = 8.130102354156005 degrees
- ssUusinh: Quad(QuadBez { p0: (344.0, 269.0), p1: (334.0, 259.0), p2: (320.0, 257.0) })/Quad(QuadBez { p0: (320.0, 257.0), p1: (366.0, 257.0), p2: (392.5, 224.5) }) = 8.130102354156005 degrees
- ssUu_rephasinh: Quad(QuadBez { p0: (373.0, 269.0), p1: (363.0, 259.0), p2: (349.0, 257.0) })/Quad(QuadBez { p0: (349.0, 257.0), p1: (395.0, 257.0), p2: (421.5, 224.5) }) = 8.130102354156005 degrees
- nyaa._csinh: Quad(QuadBez { p0: (348.5, 308.0), p1: (304.0, 290.0), p2: (259.0, 250.0) })/Quad(QuadBez { p0: (259.0, 250.0), p1: (289.0, 266.0), p2: (317.0, 266.0) }) = 13.561052400717235 degrees
- sinNnAa.virama: Quad(QuadBez { p0: (615.5, 318.5), p1: (632.0, 302.0), p2: (635.0, 279.0) })/Quad(QuadBez { p0: (635.0, 279.0), p1: (637.0, 298.0), p2: (649.0, 312.0) }) = 13.440413928666997 degrees
Check there are no overlapping path segments
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
The following glyphs have overlapping path segments:
- nndda_rephasinh: Line(Line { p0: (238.0, 512.0), p1: (238.0, 512.0) }) has the same coordinates as a previous segment.
- rAaesinh: Quad(QuadBez { p0: (189.5, 597.0), p1: (190.0, 597.0), p2: (188.0, 596.0) }) has the same coordinates as a previous segment.
- u111E8 (U+111E8): Line(Line { p0: (199.0, -114.0), p1: (199.0, -114.0) }) has the same coordinates as a previous segment.
- u111EF (U+111EF): Quad(QuadBez { p0: (489.5, 18.0), p1: (489.0, 19.0), p2: (490.0, 16.0) }) has the same coordinates as a previous segment.
- gRIsinh: Line(Line { p0: (371.0, 298.0), p1: (371.0, 298.0) }) has the same coordinates as a previous segment.
Do outlines contain any semi-vertical or semi-horizontal lines?
â ī¸ GalleCANARY-Regular.ttf
-
â ī¸ WARN
The following glyphs have semi-vertical/semi-horizontal lines:
- rsinh: Line(Line { p0: (37.0, 406.0), p1: (38.0, 533.0) }) (angle: 89.55 degrees, expected: 90.00 degrees)
- dhU_rephasinh: Line(Line { p0: (382.0, -208.0), p1: (383.0, 19.0) }) (angle: 89.75 degrees, expected: 90.00 degrees)
- dhU_rephasinh: Line(Line { p0: (413.0, 55.0), p1: (411.0, -235.0) }) (angle: -90.40 degrees, expected: -90.00 degrees)